Vista Plastic 3L
Emulsion paint for general interior use with great hiding power and high spreading capacity. Easy to apply with very good leveling end produces a smooth flat surface. Emulsion paint for general interior use with great hiding power and high spreading capacity. Economic solution, making it ideal for walls, ceilings, warehouses and general areas that require frequent painting. Easy to apply with very good leveling end produces a smooth flat surface.
Surfaces should be clean, dry and smooth, free from dust, grease and loose or flaking paint. Use VITEX's ACRYLIC PUTTY to fill any cracks or holes. New surfaces made of plaster, concrete, cement, stucco, rendering, plasterboard etc. should be first coated with ACRYLAN UNCO ECO (micronized silicone acrylic water-based primer) or VITEX's 100% ACRYLIC PRIMER (water-based) or BLANCO (white water-based primer) or DUROVIT (acrylic solvent-based primer). Surfaces previously covered with water-based paints or distempers (e.g. lime wash or ceiling white) must be primed with DUROVIT or VITOSIN (white solvent-based primer).
It is available in white and in white base that can be used for the preparation of an unlimited number of shades through VITEX's COLORFULL Tinting System.
Packaging : 3L
Drying : It is touch dry after 15-30 minutes .
Recoatability Time : It can be recoated after 3-4 hours, depending on atmospheric conditions.
Spreading Rate : 10 - 12 m2 / L per coat on properly prepared surfaces.
Thinning : Dilute 10% with water
Application : Apply by roller, brush or spray gun.