Description

GENERAL CHARACTERISTICS
VITEX Satin is a luxurious silk finish emulsion paint for interior use. It has great levelling properties and produces a velvet surface on plaster, concrete, plasterboard etc. It provides superior whiteness, great hiding power, high spreading rate and exceptional fastness to frequent washing, detergents and yellowing owed to smoking.

SURFACE PREPARATION
Surfaces should be clean, dry and smooth, free from dust, grease and loose or flaking paint. Use VITEX's Acrylic Putty to fill any cracks or holes. New surfaces made of plaster, concrete, cement, stucco, rendering, plasterboard, etc. should first be coated with VITEX's 100% Acrylic Primer (water-based) diluted up to 400% with water, Durovit (solvent-based primer) diluted up to 100% with VITEX's Brush Solvent T-300 or ACRYLAN UNCO ECO (micronize acrylic silicone water-based primer) diluted 50 - 100% with water. Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Vitosin or Durovit. Surfaces stained from smoke, graffity, coffee or any other kind of stain should be first primed with Blanco (water-based primer).

COLOURS
It is available in white. The base paint of Vitex Satin emulsion paint can be used for the preparation of a wide range of shades through VITEX's Colorfull Tinting System.

FEATURES

Packaging : 10L

Drying :  It is touch dry after 45-60 minutes, depending on atmospheric  conditions.

Recoatability Time :  It can be recoated after 3-4 hours, depending on atmospheric conditions.

Spreading Rate : 13 - 15 m2 / L per coat on properly prepared surfaces.

Thinning : 5 - 10% with water.

Application : Apply by roller, brush or spray gun.