Vitex Gypsum-board primer white 3L
Water soluble acrylic primer for interior use. It has excellent filling properties on plaster-board surfaces and every other interior surface suts as plaster, concrete etc.
VITEX'S PLASTER-BOARD PRIMER is a water soluble acrylic primer for interior use. It has excellent filling properties on plaster-board surfaces and every other interior surface suts as plaster, concrete etc. due to the prodact's exeptional filling properties, the absorbency difference between the plaster-board and all the surrounding surfaces to be painted is compensated. Moreover, it covers completely any unevenness of the plaster-boards' paper. Surfaces primed with VITEX'S PLASTER-BOARD PRIMER can be painted with any water-based decorative paint resulting in an excellent and even finishing, even when only a single layer of primer is applied.
Surfaces should be clean and dry, free from dust, grease and loose or flaking paint. Use VITEX'S ACRYLIC PUTTY to fill any cracks or holes.
It is available in white.
Packaging : 3L
Drying : It is touch dry after 30-60 minutes .
Recoatability Time : It can be recoated after 6 - 8 hours, depending on atmospheric conditions.
Spreading Rate : 12 m2 / L per coat on properly prepared surfaces.
Thinning : Dilute 5 - 10% with water for roller or brush application, and 10 - 15% with water when applied with spray gun.
Application : Apply by roller, brush or spray gun.