Description

GENERAL CHARACTERISTICS
Emulsion paint suitable for the painting of interior surfaces in areas with high moisture and vapour condensation such as kitchens, bathrooms, ceilings and basements. VITEX KITCHEN & BATH, due to its special formulation prevents effectively the growth of mould and fungi in the film of paint. It provides great hiding power, high spreading capacity and superior whiteness. It has very good leveling properties and produces a smooth, flat surface. It can be applied on properly prepared surfaces of any material.

SURFACE PREPARATION
Surfaces must be clean, dry and smooth, free from dust, grease and loose or flaking paint. Use Vitex's Acrylic Putty to fill any cracks or holes. New surfaces made of plaster, concrete, cement, rendering, plasterboard, etc. must first be coated with Vitex's 100 % Acrylic primer(water-based) diluted up to 400% with water, or Durovit (transparent solvent-based primer) diluted up to 100% with Vitex's Brush Solvent T-300 or Acrylan Unco (micronized acrylic silicone water-based primer) diluted 50 - 100% with water or Blaco Eco (White water based primer) diluted 10-15% with water. Surfaces previously covered with water-based paints or distempers (lime wash or ceiling white) should be primed with Vitosin or Durovit. Surfaces with mould, fungi and stains must be first cleaned with VITEX KITCHEN & BATH CLEANER.

COLOURS
It is available in white. VITEX KITCHEN & BATH base paint can be used for the preparation of wide range of shades through VITEX's Colorfull Tinting System.

FEATURES

Packaging : 750mL

Drying :  It is touch dry after 20-30 minutes, depending on atmospheric  conditions.

Recoatability Time :  It can be recoated after 3-4 hours, depending on atmospheric conditions.

Spreading Rate : 11 - 13 m2 / L per coat on properly prepared surfaces.

Thinning : Dilute 10% with water.

Application : Apply by roller, brush or spray gun.