Description

GENERAL CHARACTERISTICS
Pool paint is two component solvent-based epoxy paint, specifically formulated for maximum under water durability. Suitable for concrete swimming pools and metal surfaces. It provides a non-porous glossy and elastic surface, highly resistant to automated cleaning systems and pool chemicals. It has excellent adhesion and resistance to abrasion, acids, alkalis and water, offering long lasting protection. 

SURFACE PREPARATION
Surfaces should be clean, completely dry and free from dust, grease, loose material or flaking paints. Sand surfaces to be painted thoroughly and then apply 2-3 coats of Pool Paint. New concrete swimming pool should only be painted at least 28 days after construction. For the application of Pool Paint stir component A΄ gradually adding the Pool Paint thinner. Then add the entire quantity of component B΄ and stir well for approximately 3 minutes. The paint should be left to stand for 15 minutes after mixing the two components before the application. The pot life of the mixture is 4 hours at 30°C and 6 hours at 20°C. 

COLOURS
White and blue.

FEATURES

Packaging :  Set of 3,5 L (A: 2,625 L, B: 875 mL).

Drying :  Touch dry 1-2 hours, depending on humidity and temperature.

Recoatability Time : It is recoatable after 12 hours. The recoating interval time must be less than 2 days. The pool should only be filled with water 7 days after the final coating has been applied by which time the paint obtains its final properties.

Spreading Rate : 8– 10 m2 /L per coat depending on the porosity of the substrate.

Thinning : 10% for the first coat (priming) and 5% the second and the third coat with Pool Paint Thinner.

Application : Apply by brush, roller, spray gun or airless. For concrete surfaces use Pool Paint as primer, diluted by 10% with Pool Paint Thinner.