Description

GENERAL CHARACTERISTICS
WASH PRIMER is a two-component anticorrosive undercoat with very strong adhesion on glossy surfaces such as aluminum, galvanized substrates, polyester and non-corrosive metals.

SURFACE PREPARATION
Surfaces should be clean and dry, free from dust and grease and properly abrased. Before use, we add component B/ into component A/ and stir very well. The mixture must be applied 5-10 min after mixing and within 2-3 hours.

COLOURS
Available in a pale yellow shade.

FEATURES

Packaging :  Set of 820mL (A 660mL, B 160mL).

Drying :  45-60 min-1h. accordingtoenvironmental conditions (Humidity, temperature)

Spreading Rate : 10-12 m2 / L per coat on properly prepared surfaces.

Thinning : Ready foruse without dilution.

Application : Apply by brush, roller or spray gun.