DIRECT-3 in 1 brown 750mL
It is a durable, glossy, quick-drying, anticorrosive paint suitable for painting onto either old or newly painted or rusted metallic surfaces, without pre-applying any primer.
It is a durable, glossy, quick-drying, anticorrosive paint suitable for painting onto either old or newly painted or rusted metallic surfaces, without pre-applying any primer. It provides great durability, strong adhesion and long-term protection against corrosion. It has good working and levelling properties without leaving any brush and/or joint paint marks.
Remove loose rust or flaking paint from old, rusted or painted metallic surfaces. Use an abrasive paper to create a smooth surface to obtain maximum adhesion. When the surface is dry and clean, free from dust, rust, dirt or grease, apply 1-2 coats of DIRECT-1.
It is available in white, black and ten more shades (refer to colour card).
Packaging : 750mL
Drying : It is touch dry after 30 - 60 minutes, depending on atmospheric conditions.
Recoatability Time : It can be recoated after 2 - 3 hours, otherwise after 7 days, depending on atmospheric conditions.
Spreading Rate : 4 - 8 m2/ L per coat, depending on film thickness, on properly prepared surfaces.
Thinning : Ready for use by brush or short hair roller application. Dilute 20% with Vitex's Spray Gun SolventT-350 for spray application.
Application : By brush, short hair roller or spray gun. Paint quickly and carefully to ensure proper coating of the surface and obtain complete isolation from humidity, especially in difficult to paint spots, such as corners and edges. Best protection is provided with a 100μm thick dry paint film, which is formed by applying two coats of DIRECT-1.