Description

GENERAL CHARACTERISTICS
White, matt, solvent-based alkyd undercoat. It provides a perfect substrate for enamels, especially when applied to wooden surfaces and walls. VELATURA produces an excellent surface for finishing with Verolac, Platinum, Aquavit or their respective base paints. It offers great hiding power and whiteness, while at the same time it combines good brushability, excellent levelling, easy sanding and resistance to sagging.

SURFACE PREPARATION
Surfaces must be clean, dry and smooth, free from dust, grease, loose or flaking paint. Scrape off the knots from new wooden surfaces and then apply DIAXYL DECOR wood preservative. Remove flaking paint from previously painted surfaces. Use Vitex's Acrylic Putty to fill any cracks or holes. As soon as the preparation of the surface has been completed, apply one or two coats of Vitex's VELATURA. When the coating is thoroughly dry, use an appropriate abrasive paper to produce a smooth surface, remove the dust and apply the final finish.

COLOURS
It is available in white.

FEATURES

Packaging : 750mL

Drying :  It is touch dry after 1 - 2 hours .

Recoatability Time :  It can be recoated after 16 - 18 hours, depending on atmospheric conditions.

Spreading Rate :  18 - 20 m2 / L  per coat on properly prepared surfaces.

Thinning : Dilute 5% with Vitex's Brush Solvent T-300 when applying by roller or brush. To apply by spray gun, dilute 5% with Vitex's Spray Gun Solvent T-350.

Application : Apply by roller, brush or spray gun.