DUROVIT Clear Solvent-based acrylic undercoat 1L
Clear, solvent-based acrylic undercoat with high water resistance and vapour permeability. It exhibits strong adhesion and high penetration in porous surfaces such as plaster, concrete, bricks, plaster boards etc. and also surfaces coated with low quality paints or distempers. It is resistant to moisture and provides an ideal undercoat for emulsion, acrylic or masonry paints, relief and insulating coatings.
Surfaces should be clean, dry and smooth, free from dust, grease, loose or flaking paint.
It is available colourless.
Packaging : 1L
Drying : It is touch dry after 60 minutes .
Recoatability Time : It can be recoated after 2 - 3 hours, depending on atmospheric conditions.
Spreading Rate : 14 - 16 m2 / L per coat on properly prepared surfaces.
Thinning : For walls up to 100% with Vitex’s Brush Solvent T-300 and for roofs up to 30% with Vitex’s Brush SolventT-300.
Application : Apply by roller, brush or spray gun.