Vito Acrylic 3L
Emulsion acrylic paint, for exterior use, based on acrylic copolymer resins. It exhibits great hiding power and high spreading rate. It is a good value for money paint, suitable for the professional painter.
Surfaces must be clean, dry and smooth, free from dust, grease and loose or flaking paint. Use Vitex's Acrylic Putty to fill any cracks or holes. New surfaces made of plaster, concrete, cement, rendering, plasterboard, etc. must first be coated with Vitex's Durovit (transparent solvent-based primer) diluted up to 100 % with Vitex's Brush Solvent T-300 or ACRYLAN UNCO ECO (micronize acrylic silicone water-based primer) diluted 50 - 100% with water. Surfaces previously covered with water-based paints or distempers (lime wash or ceiling white) should be primed with Vitosin or Durovit.
It is available in white. Vito acrylic emulsion base paint can be used for the preparation of a wide range of shades through VITEX's Colorfull Tinting System.
Packaging : 3L
Drying : It is touch dry after 15 - 30 minutes .
Recoatability Time : It can be recoated after 3 - 4 hours, depending on atmospheric conditions.
Spreading Rate : 10 - 12 m2 / L per coat on properly prepared surfaces.
Thinning : Dilute 10% with water
Application : Apply by roller, brush or spray gun.