Description

GENERAL CHARACTERISTICS
Excellent pure acrylic emulsion paint for exterior use based on 100% acrylic copolymer resins. It provides superior whiteness, great hiding power and exceptional fastness to frequent washing and adverse weather conditions. It has very good levelling properties and creates a smooth flat surface with high vapour permeability. Acrylan can be applied to old or new properly prepared surfaces such as plaster, concrete, wood, plasterboard, etc. It is A.P.E.O. free.

SURFACE PREPARATION
Surfaces must be clean, dry and smooth, free from dust, grease and loose or flaking paint. Use Vitex's Acrylic Putty to fill any cracks or holes. New surfaces made of plaster, concrete, cement, rendering, plasterboard or surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with ACRYLAN UNCO ECO (micronize silicone acrylic water-based primer) or DUROVIT (transparent solvent-based primer). Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with BLANCO (water-based primer).

COLOURS
It is available in white. The base paint of Acrylan (white and transparent) can be used for the preparation of an unlimited number of shades through Vitex's Colorfull Tinting System.

FEATURES

Packaging : 10L

Drying :  It is touch dry after 30 - 60 minutes .

Recoatability Time :  It can be recoated after 3-4 hours, depending on atmospheric conditions.

Spreading Rate : 15 - 17 m2 / L per coat on properly prepared surfaces.

Thinning : Dilute 10% with water

Application : Apply by roller, brush or spray gun.