Welcome visitor you can login or create an account.

Online Store Theme Logo


Vitex with TEFLON 750ml

Availability: In stock
*If there are any issues with item’s stock, one of our representatives will contact you
€5.89
€6.20

The new generation matt emulsion paint Vitex with Teflon TM.

Additional Information

Description

The new generation matt emulsion paint Vitex with Teflon TM with surface protection technology provides superior stain protection, is easy to clean without any residue and creates an anti-static protection surface against dust/smoke.

GENERAL CHARACHTERISTICS

Premium quality & washability vinyl paint with matte finish for interior use, designed with Teflon™surface protection technology. Teflon™ technology creates a paint surface protection, which gives enhanced resistance to the absorption of household stains, and makes it easier to remove stains after a long period of time. Teflon technology creates an anti-static protection surface that reduces the deposition of dust, smoke and other pollutants. Removing stains is done with a soft damp cloth and soap or non-abrasive mild household cleaners.

 

The only paint in Greece, Cyprus and other Southeastern European countries with TeflonTM that offers:

 

  • Superior surface performance and protection
  • Maximum wet scrubbing resistance (Class 1)
  • Antistatic surface that repels dust, smoke and other pollutants
  • Easy to clean common household stains even after a long period of time
  • Completely smooth and flat surface
  • Superior spreading rate and hiding power
  • Easy and virtually odorless application
  • Long lasting result

 

COLOR SHADES
Available in white & thousands of shades through Vitex Tinting System.

 

TECHNICAL SPECIFICATIONS

Packaging : 750ml

Surface Drying time :  30-60 min.

Spreading Rate : 15 - 18 m2/L

Water dilution percentage : Dilute 10% with water.

Application : Apply by roller, brush or spray gun.

SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty or Visto.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco or Durovit.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with 100% Acrylic Primer or Acrylan Unco Eco or Blanco Eco.
Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with Blanco Eco or Vitosin.

 

APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and/ or relative humidity above 80%.
It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).
Allow at least 2 weeks before cleaning and washing newly painted surfaces with Vitex with Teflon™. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.